ABB ACS550-02 User Manual page 28

26
Remove the pedestal (frame size R7):
1. Remove the lower two parts of the front cover by undoing the fixing screws.
2. Undo the screws that fix the pedestal to the frame from front.
3. Undo the M8 combi screws (6 pcs) that connect the busbars of the pedestal to the upper frame. Use a torque wrench
with an extension bar.
4. Wheel the drive frame out by using the handle.
1
1
Installation
3
3
3
3
4
Wheeling the frame out
3
3