ABB ACS550-02 User Manual page 41

Controls/Display Overview
The following table summarizes the button functions and displays on the Assistant
Control Panel.
Soft key 1 – Function varies, and is
defined by the text in the lower-left
corner of the LCD display.
Up –
• Scrolls up through a menu or list
displayed in the middle of the LCD
Display.
• Increments a value if a parameter
is selected.
• Increments the reference if the
upper-right corner is highlighted (in
reverse video).
LOC/REM – Changes between local
and remote control of the drive.
Output Mode
Use the Output mode to read information on the drive's status and to operate the
drive. To reach the Output mode, press EXIT until the LCD display shows status
information as described below.
Status Information
Top. The top line of the LCD display shows the basic status information of the drive.
• LOC – indicates that the drive control is local, that is, from the control panel.
• REM – indicates that the drive control is remote, such as the basic I/O (X1) or
fieldbus.
• – indicates the drive and motor rotation status as follows:
Rotating arrow (clockwise or counter
clockwise)
LCD Display – Divided into three main areas:
• Top line – variable, depending on the mode of operation. For example,
see Status Information on page 39.
• Middle area – variable, in general, shows parameter values, menus or
lists.
• Bottom line – shows current function of the two soft keys, and the clock
display, if enabled.
LOC
1200 RPM
12.4 A
405 dm3/s
DIR
STOP – Stops the drive.
START – Starts the drive.
Control Panel Display
Soft key 2 – Function varies, and is
defined by the text in the lower-right
corner of the LCD display.
400RPM
Down –
• Scrolls down through a menu or list
displayed in the middle of the LCD
12:45 MENU
Display.
• Decrements a value if a parameter
is selected.
• Decrements the reference if the
upper-right corner is highlighted (in
reverse video).
Help – Displays context sensitive
information when the button is
pressed. The information displayed
describes the item currently
highlighted in the middle area of the
display.
• Drive is running and at setpoint
• Shaft direction is forward
Significance
or reverse
Start-Up
39