Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual page 94

Resume Using NC System Device Driver.
[Procedures]
(1) Select [Mitsubishi PC-Based NC MELDASMAGIC64 (HR62xx)] below [Other Devices,] and click
the [Properties] button.
Operation: The "Mitsubishi PC-Based NC MELDASMAGIC64 (HR62xx) Properties" window
appears.
(2) Check the check boxes in the [Device Usage] group.
(3) Click the [OK] button.
Operation: The "Mitsubishi PC-Based NC MELDASMAGIC64 (HR62xx) Properties" window is
(4) Click the [OK] button of the "System Properties" window.
Operation: The "System Properties" window is closed.
Downloaded from ManualsNet.com
7.2 How to Remove NC Card (ISA NC Card)
closed.
search engine
7. Appendices
88