Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual page 54

(12) Here, if the message of "The software for this device is now installed, but this device conficts with
!
CAUTION
If hardware conflict occurs, be sure to click the [Cancel] button to abort installation. If you
click [Next >] to continue to install the software, the personal computer may not start up
properly.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
one or more other devices..." is displayed, installation cannot be continued. Click [Cancel]. In
this case, refer to Problem 2 of chapter 6.3 "Troubleshooting," and fix the hardware conflict
before installing the software again.
search engine
48