Installing Nc System Device Driver (2) - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.2.1.3 Installing NC System Device Driver (2)

Installation of the device driver is continued automatically.
[Procedures]
(1) Check the connection of NC Card, and then turn on the personal computer.
Operation: The following message appears on the lower right corner of the screen, and then the
Display sample for WindowsXP
* This message disappears after a period of time.
(2) Click [Next >].
* In some cases, it takes several minutes for this screen to appear.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)
"Found New Hardware" wizard is opened.
* This screen does not exist
for WindowsXP.
search engine
Display sample for Windows2000
For Windows2000, uncheck all
the boxes under "Optional
search locations" and click
[Next>].
16