Setting Up Meldasmagic Monitor; Installing Meldasmagic Monitor - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.6 Setting up MELDASMAGIC Monitor

Here, set up MELDASMAGIC Monitor. MELDASMAGIC Monitor is a maintenance tool used for the
adjustment of MELDASMAGIC NC parameters and so on. Refer to "MELDASMAGIC Monitor
Operation Manual (BNP-B2192)" for details on MELDASMAGIC Monitor.
Be sure to install the utility before using MELDASMAGIC Monitor.

4.6.1 Installing MELDASMAGIC Monitor

Install MELDASMAGIC Monitor according to the procedures below.
Install MELDASMAGIC Monitor by executing "setup.exe" on the "MELDASMAGIC Monitor" floppy
disk.
[Procedures]
(1) Insert the floppy disk titled "MELDASMAGIC Monitor" into drive A.
(2) Click the [Run...] menu of the [Start] menu on the task bar.
Operation: The "Run" window appears.
(3) Enter the following in the [Open:], and then click [OK].
Operation: The installation program is started up.
(4) Install the software according to the directions from the installation program.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.6 Setting Up MELDASMAGIC Monitor
A:\setup.exe
search engine
69