Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual page 25

(3) Click the [Hardware] tab, and click the [Device Manager] button.
The "Device Manager" window is displayed.
Confirm the [Device Status] of NC System Device Driver
[Procedures]
(1) Select [Mitsubishi PC-Based NC MELDASMAGIC64 (HR655A)] below [Other devices], and then
click the [Action] - [Properties] menus.
(2) The "Mitsubishi PC-Based NC MELDASMAGIC64 (HR655A) Properties" window is displayed.
If the message of "This device is working properly" is displayed in the "Device status" field, the
device is in the normal condition.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)
search engine
19