Confirm Nc System Device Driver Operation - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.2.2.4 Confirm NC System Device Driver Operation

Confirm the installed Device Driver operating normally according to the procedures below.
Open Device Manager
[Procedures]
(1) After the personal computer is restarted, click [Settings] - [Control Panel] menus of the [Start]
menu.
(2) The "Control Panel" window is displayed.
Double-click the "System" icon on Control Panel.
(3) The "System Properties" window is displayed.
Click the "Device Manager" tab.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)
search engine
5
29