Setting Up The Utility; Installing The Utility - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.5 Setting Up the Utility

Here, set up the utility software for MELDASMAGIC.
In the utility, many convenient tools are available for using MELDASMAGIC. Refer to "Utility
Instruction Manual (BNP-B2196)" for details on the utility.

4.5.1 Installing the Utility

Install the utility according to the procedures below.
Install the utilitiy by executing "setup.exe" in the "Utility Software Disk 1" floppy disk
[Procedures]
(1) Insert the floppy disk titled "Utility Software Disk 1" into drive A.
(2) Click the [Run...] menu of the [Start] menu on the task bar.
Operation: The "Run" window appears.
(3) Enter the following in the [Open:], and then click [OK].
Operation: The installation program is started up.
(4) Install the software according to the directions from the installation program.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
A:\setup.exe
search engine
4.5 Setting Up the Utility
68