Outline Of Setup Operations; New Setup - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

3. Outline of Setup Operations

3.1 New Setup

When newly setting up MELDASMAGIC64 in the personal computer, follow the procedures below.
Downloaded from ManualsNet.com
3. Outline of Setup Operations
Set up the MELDASMAGIC64 system
Preparation before setup
Back up environment files (p. 6)
Setting up NC Card
Set up NC Card and Device Driver
Confirm NC System Device Driver operation
Initialize NC Card memory
Confirm NC Card operation
Install the standard software
Install Runtime Library (p. 64)
Assign an NC Card No. to NC Card
Install the utilities (p. 68)
Install the MELDASMAGIC monitor (p. 69)
Set up NC parameters
Install NC standard parameters (p. 70)
Install NC option functions (p. 71)
Set up NC parameters (p. 72)
Back up NC parameters (p. 73)
Install the option software
Install the option software (p. 74)
search engine
3.1 New Setup
PCI NC Card (p. 10)
ISA NC Card (p. 33)
Attach NC Card
4