Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual page 53

(10) A window for selecting the manufacturer and model of the hardware is displayed.
(11) A window confirming the setup conditions of the hardware to be installed is displayed.
Fill in:
* The setting may differ per installation.
!
CAUTION
Since the setting is necessary for the future installation (chapter 4.3.2.2 "Mounting NC Card"),
be sure to make a note of it.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
Select "Mitsubishi PC-Based NC MELDASMAGIC64 (HR62xx)," and then click [Next >]. (Specify
the xx of HR62xx according to the NC Card to be used.)
Resource type (The rotaty switch of card)
IRQ (IRQ)
I/O port address (IOPADR)
Memory range (DPADR)
search engine
47
Setting