Confirming Nc Card Operation - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

(2) The "MELDASMAGIC64 (HR62xx) Properties" window is displayed.
Click the "Setting" tab, and click the [Memory Clear] button.
(3) A confirmation message whether to execute memory clear is displayed.
Click the [Yes] button.
Operation: The mouse cursor changes to an hourglass, and the NC Card memory is cleared. It
(4) Close all the open windows.

4.3.3.5 Confirming NC Card Operation

Using the procedures below to confirm whether the installed NC Card is working properly.
Confirm the display status of the 7-segment LED on NC Card.
[Procedure]
(1) The NC Card is working properly if the 7-segment LED on NC Card is blinking.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
takes approximately 1 minute to clear the memory. When the memory clear has
finished, the "Memory clear complete!" message is displayed.
search engine
63