Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual page 32

4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)
Mount NC Card on the personal computer.
[Procedures]
(1) Attach the battery to NC Card.
(2) Mount NC Card on the personal computer's PCI bus.
*When mounting two or more NC Cards, mount all the NC Cards at once.
(3) Connect peripheral devices.
* For the details of NC Card mounting and peripheral device connection, refer to "Connection Manual
(BNP-B2203)."
26
Downloaded from ManualsNet.com search engine