Installing Nc System Device Driver For Windows 98; Installing Nc System Device Driver - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.3.2 Installing NC System Device Driver for Windows 98

4.3.2.1 Installing NC System Device Driver

Install NC System Device Driver according to the procedures below.
Install Device Driver using the hardware wizard.
(Hardware is not detected automatically.)
[Procedures]
(1) Click the [Settings] - [Control Panel] menus of the [Start] menu on the task bar.
(2) When the [Control Panel] window is displayed, double-click the "Add New Hardware" icon.
(3) The "Add New Hardware Wizard" window appears.
Close all the open applications, then click [Next >].
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.3 Setting Up NC Card and Device Driver (ISA Card)
search engine
44