Connecting The Battery - Toro LT2240 Installation Instructions Manual

14

Connecting the Battery,

Lowering the Platform, and
Closing the Hood
No Parts Required
Connecting the Battery
1. Assemble the terminal of the negative battery
cable (Figure 80) onto the negative battery post.
Figure 80
1. Nut (negative
battery-cable terminal)
2. Tighten the forward nut and T-bolt
the negative battery cable terminal.
Installing the Storage
Compartment
Models 31657 and 31659
1. Align the holes on the bottom of the storage
compartment with the holes in the chassis
brackets.
2. Assemble the storage compartment to the
machine with the 3 knobs and 3 washers
81).
g344733
2. Negative battery post
(Figure 80) of
(Figure
1. Washer
2. Knob
3. Close the storage-compartment door.
Lowering the Operator's Platform
WARNING
Operating the machine with the platform
unlatched may cause you to lose control of
the machine, resulting in serious injury to you
and bystanders.
Never operate the machine without first
checking that the operator platform latching
mechanism is fully engaged and in good
working order.
1. Lower the platform carefully
Note:
The gas lift cylinder helps support the
platform.
27
Figure 81
3. Storage compartment
(Figure 82).
g328512