Download Print this page
Toro Groundsmaster 3400 Addendum

Toro Groundsmaster 3400 Addendum

4-wheel drive traction unit, heavy-duty triple turf mower traction unit, or heavy-duty triple turf flail mower
Hide thumbs Also See for Groundsmaster 3400:

Advertisement

Quick Links

Groundsmaster
LT3340 Heavy-Duty Triple Turf Mower Traction Unit,
or LT-F3000 Heavy-Duty Triple Turf Flail Mower
Model No. 30651—Serial No. 403303793 and Up
Model No. 30657—Serial No. 403288770 and Up
Model No. 30659—Serial No. 404662987 and Up
The front wheel motors fitted to the above models
have a different method to release the brakes in the
event a customer needs to tow the machine, than
the instruction that is explained in the Operator's
Manual that was supplied with the machine. For the
above models refer to the following instructions and
keep these instructions with the machine for future
reference.
Ensure that the towing vehicle specification is suited
to braking the combined vehicle weight and able to
remain in complete control at all times. Ensure that
the parking brake of the towing vehicle is applied.
Chock the mower front wheels to prevent the mower
from rolling away.
Important:
Do not tow the machine faster than
3 to 5 km/h (2 to 3 mph); otherwise, internal
transmission damage may occur.
Towing a Machine with an
Affected Serial Number
Disconnect the front-wheel-motor-disc brakes as
follows:
1.
Chock the front wheels.
2.
Connect a rigid tow bar between the towing eye
on the front of the mower and a suitable towing
vehicle.
3.
Identify the right front wheel motor. Clean all dirt
and debris from the shaded area in
prevent contamination entering the motor when
the cover is released.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
3400 4-Wheel Drive Traction Unit,
Figure 1
to
Register at www.Toro.com.
Figure 1
1. Clean here.
4.
Loosen the end cover bolts using a M6 hex
bit following the sequence shown in
Loosen opposite bolts 1 full turn each in a star
cross pattern following the sequence indicated.
Repeat until all 12 bolts have been unscrewed
by 2 complete turns only.
Original Instructions (EN)
All Rights Reserved *3430-730* A
Printed in the USA
Form No. 3430-730 Rev A
Addendum
Figure
2.
g282315

Advertisement

loading

Summary of Contents for Toro Groundsmaster 3400

  • Page 1 Identify the right front wheel motor. Clean all dirt and debris from the shaded area in Figure 1 prevent contamination entering the motor when the cover is released. © 2019—The Toro® Company Register at www.Toro.com. Original Instructions (EN) All Rights Reserved *3430-730* A 8111 Lyndale Avenue South...
  • Page 2 g282317 Figure 3 1. End cover 2. Brake housing Repeat the above procedure on the left front wheel motor. Decommission the hydraulic service system by turning the bypass valve, located under the transmission pump, counterclockwise, a maximum of 3 turns (Figure g282316 Figure 2...
  • Page 3 Remove the wheel chocks Disconnect the tow bar. Note: The braking system now operates in the normal way. g014450 Figure 4 1. Transmission bypass valve Note: The machine is now in a freewheel condition and can be towed for a short distance at slow speed.