Toro LT2240 Installation Instructions Manual page 15

Figure 40
1. 3-pin connector—machine
wire harness (labeled
BRAKE PRESSURE SENSOR
2. Cap
9. Plug the 3-pin connector labeled
PRESSURE SENSOR
pressure transducer
Installing the Brake Pressure
Transducer
Machines with the Optional Differential Lock
Kit
1. Route the 3-pin connector labeled
PRESSURE SENSOR
front-traction manifold
3. Brake-pressure
transducer
)
BRAKE
into the connector of the
(Figure 40).
BRAKE
and wiring toward
(Figure 41).
1. Front-traction manifold
2. 3-pin connector (labeled
BRAKE PRESSURE SENSOR
2. Remove the hex-socket plug from port-PS of the
front traction manifold
g344073
1. Port-PS (front traction
manifold)
3. Assemble the adapter fitting (1/4 x 7/16 inch)
into port-PS of the front traction manifold
43) with a seal (1/4 inch).
15
Figure 41
3. Front of the machine
)
(Figure 42).
Figure 42
2. Hex-socket plug
g344918
g344933
(Figure