Toro LT2240 Installation Instructions Manual page 6

4
Installing the Headlight,
Turn Signal, and Hazard
Switches
Parts needed for this procedure:
1 Headlight switch
1 Turn signal switch
1 Hazard switch
Installing the Switches
Model 31654
1. Remove the plugs shown from the control arm
(Figure 9 and Figure
Discard the plugs.
10).
Figure 9
2. Remove the instrument panel and switch plate
from the control arm
Retain the fasteners for later installation.
g344366
1. Button-head screw (4 x 16
mm)
6
Figure 10
(Figure 11 and Figure
Figure 11
2. Instrument panel
g344364
12).
g344365