ABB ACS560 Quick Installation And Start-Up Manual page 36

6 Start up and use
36 EN - Quick installation and start-up guide
Connection macro
Connection macro
Values are based on drive type. See parameter 96.04 Macro select.
Values are based on drive type. See parameter
) Macro - Displays the
1) Macro - Displays the selected
macro name. For example, ABB
elected macro name. For
standard (2-wire).
xample, ABB standard (2-
wire).
→
→
Selected macro is ABB standard (2-wire)
elected macro is ABB standard (2-wire)
EN
) ABB standard (2-wire) -
1) ABB standard (2-wire) - De-
HI
fault macro for general purpose.
Default macro for general
3) ABB standard (vector) -
purpose.
Similar to standard macro but
uses vector control.
) Motor potentiometer -
5) PID - Suitable for closed-loop
Enables adjusting the motor
control systems such as pres-
sure control, flow control, etc.
speed using the two-push
7) Panel PID - Suitable for ap-
buttons.
plications where drive is always
controlled by PID and the refer-
) Panel PID - Suitable for
ence comes from an analog in-
put AI1.
applications where drive is
9) Pharma - Suitable for pharma-
always controlled by PID and
ceutical applications.
the reference comes from an
11) Torque control - Similar to
standard macro but uses torque
analog input AI1.
control.
) Plastic extrusion - Suitable
for plastic extrusion
→
application.
Displays the status of all I/O connections.
) SPFC - Variant of PFC and
can be used to generate a
1) DI - Digital Inputs DI1...DI6
2) AI - Analog Inputs AI1...AI2
smaller pressure spike when
3) RO - Relay Outputs
a new auxiliary motor is put
RO1...RO3
into operation.
4) AO1 - Analog Outputs
AO1...AO2
→
Displays the status of all I/O connections.
) DI - Digital Inputs DI1...DI6
) AI - Analog Inputs AI1...AI2
) RO- Relay Outputs
RO1...RO3
) AO1-Analog Outputs
AO1...AO2
1
1
3
PID
5
SPFC
PID
7
9
T
11
CTRL
0
DI1
0
DI2
0
DI3
1
0
DI4
0
DI5
0
DI6
AI1
2
AI2
1
RO1
96.04 Macro select
2) I/O Connections - Displays
2) I/O Connections - Displays
the selected macro-specific I/O
the selected macro-specific I/O
2
connections. See menu descrip-
tion below.
connections. See menu
description below.
2) ABB standard (vector) -
2) 3-wire macro - Suitable when
the drive is controlled using mo-
Similar to standard macro
mentary push buttons.
2
but uses vector control.
4) Motor potentiometer - En-
ables adjusting the motor speed
4) PFC - Pump and fan control
4
using the two-push buttons.
logic for controlling multiple
6) PFC - Pump and fan control
logic for controlling multiple
PFC
6 pumps or fans through relay
pumps or fans through relay
outputs of the drive.
outputs of the drive.
8
8) SPFC - Variant of PFC and
6) Pharma - Suitable for
can be used to generate a
10 smaller pressure spike when a
pharmaceutical applications.
new auxiliary motor is put into
8) PID - Suitable for closed-
operation.
10) Plastic extrusion - Suitable
loop control systems such as
for plastic extrusion application.
pressure control, flow
control, etc.
5) AI1 and AI2 values
6) AO1 and AO2 values
5) AI1 and AI2 values
6) AO1 and AO2 values
0.000V
5
0.000mA
(page 65).