Reinstalling Covers - ABB ACS560 Quick Installation And Start-Up Manual

30 EN - Quick installation and start-up guide

Reinstalling covers

Reinstalling covers
Reinstalling cover, frames size R0...R2
￭ Reinstalling cover, frames size R0...R2
1. Reinstall the cover.
1. Reinstall the cover.
2. Tighten the retaining screw at the bottom with a screwdriver.
2. Tighten the retaining screw at the bottom with a screwdriver.
EN
HI
104 Electrical installation
Reinstalling covers, frame size R3, R4
￭ Reinstalling covers, frame size R3, R4
1. Reinstall the module cover. Put the tabs on the cover top in their counterparts on
1. Reinstall the module cover. Put the tabs on the cover top in their counterparts on the
the housing and then press the cover. (1a.1b).
housing and then press the cover. (1a.1b).
2. Tighten the two retaining screws with a screwdriver.
2. Tighten the two retaining screws with a screwdriver.
1
2
2a
1b
Electrical installation 103