Motor Data - ABB ACS560 Quick Installation And Start-Up Manual

34 EN - Quick installation and start-up guide
Sub menus
The sub-menu items allows you to change settings and set actions. Some sub menus also
have menus and/or option lists. Each sub-menu item has access to frequently used
parameters. For the complete parameter list, go to Parameter settings
Note:
The content of the sub menus depend on the drive type.

Motor data

Values in this menu are based on the motor rating plate. See parameter group 98 User
motor parameters.
EN
Note:
HI
Values cannot be changed while drive is running.
1) Motor control mode
3) Motor nominal current
5) Motor nominal frequency
7) Motor nominal torque
9) Motor nominal Cos Φ
Motor control
See parameter group 97 Motor control.
1) Start mode – Automatic,
constant time, Fast
3) Acceleration time - Time for
speed to change from zero to
the speed defined by parameter.
5) Maximum frequency/ Speed
- Maximum allowed fre-
quency/speed.
7) Minimum frequency/ Speed
- Minimum allowed fre-
quency/speed.
→
Selected start mode is Automatic.
1) Automatic - Default start mode.
Guarantees optimal motor start in
most cases. It includes the flying
start function (starting into a rotating
motor) and the automatic restart
function. The drive motor control
program identifies the flux as well
as the mechanical state of the motor
and starts the motor instantly under
all conditions.
.
2) Motor nominal power
4) Motor nominal voltage
6) Motor nominal speed
8) Motor phase order - U V W,
U W V
2) Stop mode – Coast, Ramp
4) Deceleration time - Time for
speed to change from the speed
defined by parameter to Zero.
6) Maximum current - Maxim-
um allowed current.
2) Constant - Enables constant pre-
magnetizing time (the motor start is
synchronized with the release of a
mechanical brake).
3) Fast - The pre-magnetizing time
is determined automatically, being
typically 200 ms to 2 s depending
on motor size. This mode does not
have a shortcut icon.