Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 144

P O I N T
P O I N
(1) Date and time displayed by time display function
The time display function represents the date and time of the GOT maintained by the internal clock function.
The clock function sets the clock to be used as standard for adjusting the time between the GOT and PLC
CPU.
The way of adjusting the time between the GOT and PLC CPU differs as follows depending on the clock to be
used as standard:
(a) Using the time of clock data in PLC CPU as standard (time adjustment)
Set the clock data of GOT to the time of clock data in PLC CPU.
(b) Using the time of clock data in GOT as standard (broadcast)
Set the clock data of PLC CPU to the time of clock data in GOT.
A battery is required for the clock data to be maintained while the power to GOT is off.
(2) Change in settings of clock function
The settings of clock function can be changed using the clock setting function provided in GT Designer3 or
Utility function.
For the details of the time display function, refer to the GT Designer3 (GOT2000) Screen Design Manual.
5 - 62
5. Drawing fundamentals
5.9 Window screen creation
(a) Adjust
(b) Broadcast