(From previous page)
4 - 4
4. From GOT screen creation up to the test
4.2 Screen creation
(Next page)
5.
When the left screen appears, set the
5.
communication driver as follows.
Communication Driver:
6.
6.
Click the
7.
On the screen shown left, click the
7.
8.
On the screen shown left, set the GOT IP
address as follows.
8.
GOT IP Address: 192.168.3.18
9.
Click the
[New Project Wizard] dialog.
9.
Ethernet(MELSEC),
Q17nNC, CRnD-700,
Gateway
button.
button.
button to return to the