Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 163

(From previous page)
7.
8.
(2) Setting Base Screen No.1
7.
Select [Object] - [Switch] - [Bit Switch] and click
a desired position on which a bit switch is to be
placed.
Change the width of the switch and configure
the settings as follows.
[Device] tab
Device: M31
Action: Alternate
[Style] tab
Shape: FA Control Switch Figure A1
Shape Color (ON): Red (100 SW_04_1_R)
[Text] tab
Font: Outline Gothic
Text Size: 16
Text: Run/Stop
Select OFF=ON.
8.
Copy the lamp created in
on the screen, and configure the settings as
follows.
[Device/Style] tab
Device: M31
Shape Color (ON): Cyan
[Text] tab
Text: Run command
Select OFF=ON.
9.
Copy the Go To Screen switch (control screen)
of Base Screen No. 2, paste the switch on the
screen, and configure the settings as follows.
9.
[Text] tab
Text: Base screen
Select OFF=ON.
1.
Copy the Go To Screen Switch (alarm) of Base
Screen No. 1, and change the settings as
follows:
[Next Station] tab
Screen Type: Base
Screen No.: 3, Operating time display
[Text] tab
1.
Text: Operating time display
Select OFF=ON.
6.2 Training screen creation
(OFF): Blue (97 SW_04_0_B)
5.
, paste the copy
6. About debug
1
2
3
4
5
6
6 - 7