Base Screen Switching With The Touch Switch - Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook

5.1.4

Base screen switching with the touch switch

GOT display screen is switched when the screen switching device value is written with the touch switch.
Example: In the case of device for base screen switching: D0
RUN lamp
Screen No. 10
Stop
5 - 6
5. Drawing fundamentals
5.1 Switching the screen to be displayed
Screen No. 5
RUN lamp
No. 10
Touch switch setting
Operation setting: Base switching
Screen No. 5
No.10
Fixed to "10"
The current value of D0 is stored five because the
GOT displays screen No. 5.
Set both of X1 and X2 in OFF with sequence
program, and touch No. 10 touch switch.
The GOT displays screen No. 10 because the
current value of D0 is changed to 10 with the touch
switch.