Equipment Required For Using Got - Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook

1.5 Equipment required for using GOT


GOT external appearance and interface
[Front face]
Human sensor
The GOT detects an operator and
displays its screen automatically.
When no one is around,
the backlight turns off to
save energy.
* GT27 (15" and 12.1" only)
USB device
Data can be transferred without
opening the cabinet.
* The USB device is on the rear face for the
white model and GT21.
USB host
Screen data can be transferred and
data in the GOT can be
retrieved using a USB memory.
A USB mouse and keyboard
can be connected.
* GT27 and GT25 only. The USB host is on
the rear face for the white model.
[Rear face]
Extension interface
Communication and option units
can be mounted.
*
GT27 and GT25 only
Ethernet
Up to four types of controllers from
different manufacturers* can be
connected simultaneously
by Ethernet.
* Up to two types of controllers for GT21
RS-232
Various FA devices, barcode reader,
serial printer can be connected.
* This image is GT2712.
1 - 10
1. What is the GOT?
1.5 Equipment required for using GOT
RS-422/485
Various FA devices can be
connected.
The stylish and simple design with
a linear motif is sleek and
complements any machine design.
iF Design
Award
2014
The long life cycle minimizes
maintenance and replacement costs.
USB device
The GOT can be connected
to a personal computer
to transfer data.
* White model only
Simple design
LED backlight
SD card slot
A large amount of data including
alarms and logging data
can be saved.
Side interface
A wireless LAN communication unit
can be mounted.
* GT27 and GT25 only
USB host
A USB memory can be mounted
to save alarms and logging data.
A USB mouse and keyboard can
be connected.
* GT27 and GT25 only