Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 251

Serial communication unit
The module that provides the functions for connecting with the PLC and a computer (GOT or personal computer)
and for reading/writing PLC devices.
Connect the serial communication module to the GOT built-in interface or the communication unit.
SET (Set)
To switch ON the bit device or the specified bit of the word device of the PLC.
The signal switched ON remains ON until it is reset.
Shift JIS code
Shift JIS is a Kanji-character encoding, which is commonly used and practically standardized for expressing
Japanese characters in the personal computer.
Shortcut keys
Shortcut keys are keys or combinations of keys that allow operations without opening the menu.
Shortcut keys operate combining alphanumeric keys with
Special (D)/(SD)
These are registers with determined applications in the PLC.
A variety of information can be viewed, including PLC CPU information and MELSECNET information.
The QCPU and QnACPU have dedicated SD devices.
With the ACPU, these are D9000- .
Special internal relay (M)/special relay (SM)
These are internal relays (M) with determined applications in the PLC.
A variety of information can be viewed, including PLC CPU information and MELSEC information.
QCPU and QnACPU have dedicated SM devices.
With the ACPU, these are M9000- .
Standard System Application
The basic system application is used to operate the GOT and display the utility.
Status display bar
The status display bar is the bottom line of the GT Designer3 display. It displays guidance, cursor information,
position information, etc.
Superimpose window
A window superimposed on a base screen and displayed as a part of the base screen.
Up to two (superimpose window 1 and 2) superimpose windows can be displayed simultaneously.
System information
This function transmits the GOT status (screen number being displayed, error number, etc.) to the PLC, and
outputs information (GOT error resets etc.) from the PLC to the GOT. This function is set to a word device.
A read device reads information to the GOT.
A write device writes information from the GOT.
T
Template
Templates are for easily saving and editing figures and objects.
Text Display
Character string data is input and displayed.
Character string data can be written to the word devices and the buffer memory in a special function module.
Text file
This is a file containing only letters, numbers, and symbols.
A comment can be output to a text file, edited with an editor, and the edited file can be input.
Since object settings and other GOT screen information can be output to a text file with the print function, it is also
possible to read this file into a word processor and create an original document.
key or key.
Ctrl ALT
1
2
3
4
5
6
App - 67