Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 36

<Action description>
(GOT)
Touch.
Run lamp
Run Stop
Data 0
(GOT)
Turns ON.
Run lamp
Run Stop
0
Data
(GOT)
"123" is displayed.
Run lamp
Run Stop
Data 123
(GOT)
Touch.
Run lamp
Run Stop
Display turns OFF.
Data 123
2 - 2
2. GOT operation
2.1 Summary of operation
(PLC CPU)
Turns ON.
M0 M1 Y10
Y10
Y10
MOV K123 D10
(PLC CPU)
Turns ON.
M0 M1 Y10
Y10
Y10
MOV K123 D10
(PLC CPU)
"123" is stored into D10.
Y10
M0 M1
Y10
Y10
MOV K123 D10
(PLC CPU)
M1 turns ON. Y10 turns OFF.
M0 M1 Y10
Y10
Y10
MOV K123 D10
1.
While the touch switch "Run" on the GOT is
being touched, the bit device "M0" has been ON.
2.
When the bit device "M0" turns ON, the bit
device "Y10" turns ON.
Also, the ON figure is displayed on Run Lamp in
which the monitor device has been set to the bit
device "Y10".
3.
As the bit device "Y10" has been ON, "123" is
stored into the word device "D10".
"123" is also displayed in the numerical display
on the GOT in which the monitor device has
been set to the word device "D10".
4.
While the touch switch "Stop" on the GOT is
been touched, the PLC CPU bit device "M1" has
been ON.
The PLC CPU bit device "Y10" turns OFF, and
Run Lamp turns OFF.