(From previous page)
(Next page)
3.
Configure the controller setting.
Set the items as shown below.
(Settings for this item have already been
performed in the new project wizard
described in section 4.2.1.)
3.
Manufacturer: MITSUBISHI
Controller Type: MELSEC-Q/QS, Q17nD/
5.
I/F: Standard I/F(Ethernet):Multi
Driver: Ethernet(MELSEC), Q17nNC,
4.
4.
Configure the detail setting as follows.
GOT Net No.: 1
GOT Station: 1
GOT Communication Port No.: 5001
For the other items, use their default setting.
5.
Click the
6.
On the screen shown left, set the GOT IP
address as follows.
(Settings for this item have already been
6.
performed in the new project wizard
described in section 4.2.1.)
GOT IP Address: 192.168.3.18
For the other items, use their default setting.
4. From GOT screen creation up to the test
M/NC/DR, CRnD-700
CRnD-700, Gateway
button.
4.2 Screen creation
1
2
3
4
5
6
4 - 9