Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 23


Required equipment
The equipment required to connect the GOT to the PLC CPU is shown below.
Personal
[1]
computer
[2]
GT Works3
Equipment name
[1] Personal computer
[2] GT Works3
[3] USB cable
[4] Communication unit
[5] Connection cable
*1 The communication unit varies depending on the PLC connection type.
When the GOT is connected with a PLC by using an interface built in the GOT (Ethernet interface, RS-232 interface, or RS-422/
485 interface), no communication unit is required.
*2 The connection cable varies depending on the connection type.
The connection cables used for each connection type are shown below.
Ethernet connection, CC-Link IE Field Network
connection
Direct CPU connection
Computer Link connection
Bus connection
CC-Link connection
MELSECNET/H connection, MELSECNET/10
connection, CC-Link IE Controller Network connection Optical fiber cable
*1
USB cable
[3]
Communication unit
Device to be used for writing the data stored in GOT.
Device to be used for writing the data stored in GOT.
Cable to connect with the personal computer and GOT.
Unit to connect the PLC CPU connection cable.
Cable to connect with the GOT and PLC CPU.
Connection type
For RS-232 connection
For RS-422 connection
For RS-232 connection
For RS-422 connection
For optical fiber cable connection
For coaxial cable connection
The connection cables are exclusive products. (Only the Ethernet connection cable is commercially available.)
GOT2000
Connection cable
[5]
[4]
Application
*1
*2
Ethernet cable
RS-232 cable
RS-422 cable
RS-232/422 conversion cable
RS-232 cable
RS-422 cable
RS-232/422 conversion Cable
Bus connection cable
CC-Link dedicated cable
Coaxial cable
1. What is the GOT?
1.5 Equipment required for using GOT
PLC
*1
Connection cable
1 - 11
1
2
3
4
5
6