Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook page 21

Category Function name
Device monitor
Sequence program monitor
(Ladder)
Sequence program monitor
(SFC)
Network monitor
Intelligent module monitor
Drive recorder
Servo amplifier monitor
R motion monitor
Q motion monitor
Motion SFC monitor
CNC monitor
CNC data I/O
CNC machining program edit
Log viewer
FX list editor
FX ladder monitor
iQSS utility
System launcher
MELSEC-L troubleshooting
*1 Necessary units when using GT27, GT25, GT23, or GT21 are shown. Parenthesized devices are required depending on
conditions of use.
*2 Data is output to the printer that is recognized by the personal computer.
*3 CSV files are saved in the virtual drive of the personal computer so that it is recommended to output the files to printers.
*4 Only the GOTs with SVGA or higher resolution are supported.
*5 Remote personal computer operation function (Ethernet) cannot be used.
The following screens are displayed horizontally:
Utility screen, monitor and data management screens that are displayed from the utility screen (sequence program monitor),
video camera images in the multimedia and video display functions
For the details of other GOT operations when placed vertically, please refer to the appropriate manuals or Help.
*6 Excluding GT2103-PMBLS.
*7 GT2104-RTBD only.
*8 Excluding GT2705.
*9 To use multiple units such as extension units, barcode readers, or RFID controllers with a GT2705, the total current consumption
of the units should be less than the value that the GT2705 can provide. For the details, please refer to an appropriate GOT2000
series manual.
*10 GT2715, GT2712 only.
*11 For the applicable units and interface boards, please refer to appropriate manuals.
*12 Use the standard interface of the personal computer
*13 When using functions that require a USB memory or SD memory card, a virtual drive in the personal computer is used.
*14 GT2103 requires an SD memory card unit (GT21-03SDCD) separately. GT2103-PMBLS does not allow for SD cards.
*15 GT2104-R, GT2103-PMBD only.
*16 On GT2103-PMBLS, only the functions that do not require SD card can be used.
GT27
*1
Necessary devices
SD card or USB
memory
SD card or USB
memory
(SD card or USB
memory)
SD card or USB
memory
●
SD card or USB
●
memory
●
(SD card or USB
memory)
SD card or USB
memory
: Supported —: Not supported
●
GT25
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
●
*4 *4
●
*4 *4
●
*4 *4
● ●
● ●
● ●
● ●
● ●
● ●
1. What is the GOT?
1.4 GOT function list
GT
GT21
SoftGOT2000
● —
— —
— —
— —
— —
— —
— —
— —
— —
— —
— —
— —
— —
— —
● —
*7
— —
— —
— —
— —
1 - 9
1
2
3
4
5
6