GE AF-650 GP Programming Manual page 153

[60] Logic rule 4
[61] Logic rule 5
[70] Logic Controller Time-out 3
[71] Logic Controller Time-out 4
[72] Logic Controller Time-out 5
[73] Logic Controller Time-out 6
[74] Logic Controller Time-out 7
3
[75] Start command given
LC-03 Reset Logic Controller
Option:
[0] * Do not reset Logic Controller
[1] Reset Logic Controller
3.19.2 LC-1# Comparators
Parameters to configure the Logic Controller (LC) comparators. Comparators are used for comparing variables with fixed preset values.
LC-10 Comparator Operand
Array [6]
Option:
[0] * DISABLED
[1] Reference
[2] Feedback
[3] Motor speed
[4] Motor Current
[5] Motor torque
[6] Motor power
[7] Motor Rated Voltage
[8] DC-link voltage
[9] Motor Thermal
[10] Drive thermal
[11] Heat sink temp.
[12] Analog input AI53
[13] Analog input AI54
[14] Analog input AIFB10
[15] Analog input AIS24V
[17] Analog input AICCT
[18] Pulse input FI29
[19] Pulse input FI33
152
Function:
Retains programmed settings in all group LC-## parameters.
Resets all group LC-## parameters to default settings.
Function:
Choice [1] to [31] are variables which will be compared based on their values. Choice [50] to [186] are
digital values (TRUE/FALSE) where the comparison is based on the amount of time during which they are
set to TRUE or FALSE, respectively. See par. LC-11 Comparator Operator.
Select the variable to be monitored by the comparator.
DISABLED [0] The comparator is disabled.
Reference [1] The resulting remote reference (not local) as a percentage.
Feedback [2] In the unit [RPM] or [Hz]
Motor speed [3] [RPM] or [Hz]
Motor current [4] [A]
Motor torque [5] [Nm]
Motor power [6] [kW] or [hp]
Motor voltage [7] [V]
DC-link voltage [8] [V]
Motor thermal [9] Expressed as a percentage.
Drive thermal [10] Expressed as a percentage.
Heat sink temp [11] Expressed as a percentage.
Analog input AI53 [12] Expressed as a percentage.
Analog input AI54 [13] Expressed as a percentage.
Analog input AIFB10 [14] [V]. AIFB10 is internal 10 V supply.
Analog input AIS24V [15] [V] Analog input AICCT [17] [°]. AIS24V is switch mode power supply: SMPS 24 V.
Analog input AICCT [17] [°]. AICCT is control card temperature.
Pulse input FI29 [18] Expressed as a percentage.
Pulse input FI33 [19] Expressed as a percentage.
AF-650 GP Programming Guide