GE AF-650 GP Programming Manual page 127

DN-31 Store Data Values
Option:
[0] * Off
[1] Store all setups
3
[2] Store all setups
DN-32 Devicenet Revision
Range:
0* []
DN-33 Store Always
Option:
[0] * Off
[1] On
DN-39 Devicenet F Parameters
Array [1000]
No Keypad access
Range:
0* []
126
Function:
Parameter values changed via DeviceNet are not automatically stored in non-volatile memory. Use this
parameter to activate a function that stores parameter values in the EEPROM non-volatile memory, so
changed parameter values will be retained at power-down.
Deactivates the non-volatile storage function.
Stores all parameter values from the active set-up in the non-volatile memory. The selection returns to
Off [0] when all values have been stored.
Stores all parameter values for all set-ups in the non-volatile memory. The selection returns to Off [0]
when all parameter values have been stored.
Function:
View the DeviceNet revision number. This parameter is used for EDS file creation.
Function:
Deactivates non-volatile storage of data.
Stores parameter data received via DeviceNet in EEPROM non-volatile memory as default.
Function:
This parameter is used to configure the frequency converter via DeviceNet and build the EDS-file.
AF-650 GP Programming Guide