Advertisement
ViewPoint 8650C
User Guide
Step 6 Set MCU alias and Password.
Step 7 Click OK.
----End
Configuring the SNMP
Step 1 Log in to the web interface of the MCU.
Step 2 Choose Settings > H.323 and SIP to display the H.323 and SIP page shown in
Step 3 Choose Settings > Settings > SNMP to display the SNMP page shown in
Figure 7-5 SNMP
Step 4 In Host address 1 through Host address 5, enter the SMC2.0 severs' IP addresses
respectively.
Retain the default values for other parameters.
Step 5 Click OK and restart the MCU to enable the settings to take effect.
Issue 10 (2013-07-20)
MCU alias and Password will be required when you add the MCU to the SMC2.0. Record their values
for future use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Holding a Conference on the SMC2.0
Figure
Figure
7-4.
7-5.
78
Advertisement
