Advertisement
ViewPoint 8650C
User Guide
4.
5.
6.
7.
Step 2 Configure the MCU.
1.
2.
Issue 10 (2013-07-20)
Figure 8-11 GK Properties dialog box
Select Enable NAT, and then enter the public IP address to be mapped to in the NAT IP
text box.
If the GK and the MCU are on the same private network, click Protocol Settings to
display the Protocol Settings tab page, as shown in
Figure 8-12 Protocol Settings tab
Set Q.931 Route Mode to GK Routed on Condition and select Enable H.245
Routing.
Click OK.
Login to the web interface.
Choose Settings > H.323 and SIP to display the H.323 and SIP
Figure
8-13.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Service Configuration
Figure
8-12.
99
Advertisement
