Advertisement
ViewPoint 8650C
User Guide
Table 6-4 Participant parameters
Parameter
Participant name
Type
Protocol type
Participant Number
Participant
Password
IP address
Issue 10 (2013-07-20)
Description
Name used to identify a
participant.
Type of a participant.
Terminal: participant that
uses an HD or SD
videoconferencing
endpoint
Upper-level MCU:
participant that added to
the cascaded conference as
a site in a cascaded
network
NOTE
It is unavailable for conferences
on the built-in web interface.
Lower-level MCU:
participant that added to
the cascaded conference as
a site in a cascaded
network
NOTE
It is unavailable for conferences
on the built-in web interface.
Protocol used by a participant
endpoint. Available values are
H.323 and SIP.
Participant number for the
endpoint. After the endpoint
registers with a GK, this
number can be used to call the
endpoint.
Password used for the
authentication performed
when a participant endpoint
registers with a GK. This
password must be the same as
the password defined on the
participant endpoint.
The IP address of an endpoint
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Holding a Conference on the Web Interface
Setting
The name must meet the following
requirements:
Contain 1 to 64 characters.
Cannot end or start with a
space.
Example: site1
Example: Terminal
Select H.323.
NOTE
If a GK is enabled for a conference,
enter the value of E.164, which is
predefined when
Registration Parameters on a
Videoconferencing
Example: 0100001
Set this parameter to the value of
Password described in
Setting GK Registration
Parameters on a
Videoconferencing
Example: 123456
Example: 200.54.10.137
5.1.7 Setting GK
Endpoint.
5.1.7
Endpoint.
66
Advertisement
