Advertisement
ViewPoint 8650C
User Guide
P2P Call CDR
A point-to-point CDR records the information about a point-to-point conference initiated by
an endpoint.
Endpoint type can be one of the following two values:
8.7.2 Viewing CDRs
From the Web interface, you can view the details of a CDR.
Procedure
Step 1 Choose Settings > CDR to display the CDR page as shown in
Figure 8-20 CDR
Step 2 Select the CDR to be viewed from the CDR list.
Step 3 View the details of the selected CDR under CDR.
Issue 10 (2013-07-20)
SO: This indicates that a participant is disconnected.
−
Format:
SO Participant number Participant name Time (GMT offset)
−
Example:
SO 1 Site 1 2008/11/24 14:00 (480)
Format:
Start time (GMT offset) End time (GMT offset) Number of the endpoint that places
the call IP address of the endpoint that places the call: Port Type of the endpoint
that places the call Number of the endpoint that is called IP address of the endpoint
that is called: Port Type of the endpoint that is called Conference rate
Example:
2009-07-10 17:53:13 (480) 2009-07-10 17:53:15 (480) 07552006 10.11.240.112:1720 0
07552009 10.11.240.114:1720 0 1024 kbit/s
0: This indicates that the endpoint is a terminal.
1: This indicates that the endpoint is not a terminal. For example, the endpoint can be a
voice gateway.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Service Configuration
Figure
8-20.
107
Advertisement
