Download Print this page

Huawei ViewPoint 8650C Series User Manual page 64

Advertisement

ViewPoint 8650C
User Guide
Parameter
Audio
Protocol
Support
continuous
presence
Support rate
adaptation
MultiChan
Extra Adapt
Nums
Support
NRS
Support
multicast
Support
presentation
Support
Mediastream
Encrypt /
Issue 10 (2013-07-20)
Description
Auto/Auto, H.261/Auto, H.263/Auto, and H.264/Auto.
The default value is Auto.
Ensure that the terminal and the MCU support these
protocols and video formats.
Available options are: G.711U, G.711A, G.722-48k,
G.722-56k, G.722-64k, G.728, G.729, AAC-LD single,
AAC-LD double, AAC-LD triple, AAC-LC single,
AAC-LC double, HWA-LD single, HWA-LD double
and Auto.
Specifies whether the conference supports the CP. If
the CP is required, you can select Support continuous
presence and select the mode of the CP.
The CP refers to that the terminal screen can display
more than two sites video simultaneously. After the CP
is broadcasted, you can view the videos of multiple
sites at the same time.
There are 42 types of layouts of the CP. For different
CP layouts, the number of displayed participants, the
arrangement of the participant positions, and the size of
the participants are different.
Select it if the sites in the conference need to join the
conference at different rates.
NOTE
If the transmission rate of a site in the conference is lower than
the transmission rate of the conference and the rate adaptation
resources of the conference are not available, the conference
cannot be scheduled.
Sets the number of the adaptation resources assigned by
the system when a site chooses to view a lower-level
site but the video transmission rate of the site is
inconsistent with the multi-channel video transmission
rate.
Select it if the conference implement network
recording.
If the multicast function is required during the
conference, you can select Support multicast and set
the multicast parameters.
CAUTION
The multicast conference can be scheduled only on the
MCU8650 and MCU8660.
If the conference supports the dual-stream mode, you
should select Support presentation and set the
parameters of the additional media channel.
To encrypt the media streams transmitted during the
conference, you need to select Support Mediastream
Encrypt, and then select an encryption type.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Holding a Simple Conference
Setting
Default Value:
Auto.
Not selected
Not selected
Not selected
Not selected
Not selected
Not selected
Not selected
56

Advertisement

loading

This manual is also suitable for:

Viewpoint 8650c-12Viewpoint 8650c-24V100r008