Download Print this page

Huawei ViewPoint 8650C Series User Manual page 53

Advertisement

ViewPoint 8650C
User Guide
Step 3 Set the parameters listed in
Table 5-9 H.323 parameters
Parameter
Enable GK
GK address
E.164
H.323 ID
Authenticat
ion user
name
Password
Issue 10 (2013-07-20)
Table
5-9.
Description
Whether the endpoint registers with the GK.
Enable: The endpoint registers with the
GK after being started. The GK
functions as a bridge to transfer call
information between videoconferencing
endpoints and the MCU, translates the
addresses of the videoconferencing
endpoints and MCU, and controls calls
and bandwidth. If you have defined
endpoints on the MCU and the endpoints
and MCU have registered with the same
GK, the MCU can call the endpoints
using their IP addresses or numbers.
Disable: The endpoint does not register
with a GK. In this case, the MCU can
call the endpoint only using its IP
address.
GK server IP address. This IP address is
used by the endpoint to register with the
GK. Ensure that the GK is online during
registration.
Participant number for the endpoint. After
the endpoint registers with a GK, this
number can be used to call the endpoint.
Name by which a GK identifies the
endpoint after it registers with the GK.
User name used for the authentication
performed when the endpoint registers with
the GK.
Password used by the endpoint to register
with the GK. The GK uses this password to
authenticate the endpoint.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Holding a Simple Conference
Setting
Set this parameter to Enable.
In this example, the endpoint
registers with the embedded
GK of MCU. Therefore, set
this parameter to the IP
address of MCU.
If the endpoint registers with
an SC server, set this
parameter to the IP address of
the SC server.
Example: 200.54.0.144
The number contains a
maximum of 32 digits.
Example: 0100001
The name can consist of
digits, letters, and special
characters, such as @ # %.
Example: terminal1
The name can consist of
digits, letters, and special
characters, such as @ # %.
Example: T1
The password contains a
maximum of 32 characters.
Example: 123456
45

Advertisement

loading

This manual is also suitable for:

Viewpoint 8650c-12Viewpoint 8650c-24V100r008