Advertisement
ViewPoint 8650C
User Guide
Figure 8-13 H.323 and SIP
3.
Set GK parameters. If the registered GK and the MCU are in the same network segment,
set GK address to the private IP address of the GK. If not, set GK address to the public
IP address of the GK.
4.
Click OK.
5.
Choose Settings > Network to display the Network
Figure 8-14 Network
6.
Select Enable NAT and set NAT address to the public IP address that is mapped to.
7.
Click OK
When adding a site from the RM, you must define the site as an IP site if the terminal used at the site is
on the same network as the MCU.
Issue 10 (2013-07-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Service Configuration
Figure
8-14.
100
Advertisement
