Advertisement
ViewPoint 8650C
User Guide
Procedure
Step 1 Log in to the MCU web interface.
Step 2 Choose Settings > H.323 and SIP > SIP.
Step 3 Set SIP trunk parameters in
Table 8-3 SIP TRUNK parameters
Parameter
Enable SIP
TRUNK
SIP TRUNK
Step 4 Click OK.
----End
8.10 Configuring the IMS interconnection settings
Context
When deploying an MCU on the Huawei IMS core network, you need to configure the
settings in the MRFC, such as the addresses of the two main control boards of the MCU, TCP
connection port, authentication password, and MCU alias. For details, see the User Guide
provided with the related devices.
This section describes how to configure the SIP connection parameters on the MCU.
Procedure
Step 1 Login to the web interface.
Step 2 Choose Settings > Settingsto display the Settings page.
Step 3 Click the RM Connection to display the RM Connection page shown as
Issue 10 (2013-07-20)
After the SIP Trunk function is enabled on the MCU, the SIP Trunk is used for all calls made by
dialing site numbers and the SIP server is not used.
After the SIP Trunk function is enabled on the MCU, calls to sites by using IP addresses still follow
the IP call process and do not use the SIP Trunk.
Description
SIP Trunk function can be activated after enabling
SIP TRUNK.
After the SIP Trunk parameters are set, when the
participant calls a SIP site by dialing the site
number, the device to which the SIP Trunk IP
address points is used to make the call.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table
8-3.
8 Service Configuration
Setting
Selected
Choose and set the
Prefix or Suffix ,
and then set the IP
address.
Figure
8-22.
109
Advertisement
