Advertisement
ViewPoint 8650C
User Guide
Figure 5-10 Adding an 8650C
Parameters as shown in
Table 5-10 Parameters of the MCU
Parameter
Name
Type
Standby
MCU
Issue 10 (2013-07-20)
The parameters in TYPE and Standby MCU can be used only when the parameter in
BACKUPMCU of the RM configuration file RMCC.ini is set to 1.
You can scan the IP address of the MCU by clicking IP Scan.
Figure 5-10
Description
The name of the MCU.
There are two types of MCU: active MCU and standby
MCU.
NOTE
The default value is active. When you choose standby, the MCU
is defined as the standby MCU.
Select the standby MCU.
Only when you have added a certain MCU as the
standby MCU can you specify it as the standby MCU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
are described in
Table
5-10.
5 Holding a Simple Conference
Setting
Example:
MCU8650C.
-
-
47
Advertisement
