Setting The Enr1Deta Module T/H Sensor Device Address - Huawei ECC500 User Manual

ECC500
User Manual
Figure 4-23
Figure 4-23 Changing the password
Figure 4-24
Restoring factory settings will restore the ECC500 parameters to their factory settings.
Perform this operation with caution.
Figure 4-24 Restoring factory settings
4.4.1 Setting the ENR1DETA MODULE T/H Sensor Device
Address
Procedure
Step 1 Operate the DIP switch on the T/H sensor to set the device address for the sensor.
Issue 05 (2020-03-16)
shows how to change the LCD login password.
shows how to restore ECC500 factory settings over the LCD.
Copyright © Huawei Technologies Co., Ltd.
4 Installation and Commissioning
44