Huawei ECC500 User Manual page 96

ECC500
User Manual



The number of connected devices for ECC500s A and B must be the same.
Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Maintenance > Configuration File, as shown in
Figure 5-37 Exporting a configuration file
Step 3 Export a configuration file.
1.
2.
Step 4 Import a configuration file.
1.
2.
----End
Issue 05 (2020-03-16)
Before importing the operating parameters for a device, add the device on the ECC500 WebUI.
Device alarm parameters in System Settings > Alarm Parameters
System site name in System Settings > Site Settings
SNMP site name in System Settings > SNMP Settings
Click Back Up Current Settings.
Save the current configuration file to the PC.
Log in to the WebUI of the ECC500 to which a configuration file is to be imported.
Choose Maintenance > Configuration File.
Click Browse, specify the path where the configuration file is stored in the PC, and click
Upload.
After the upload is complete, a message "Uploaded successfully, monitoring restart later"
is displayed and the ECC500 will automatically restart.
Copyright © Huawei Technologies Co., Ltd.
5 UI Description
Figure 5-37.
88