Setting The Ups2000-G-B Device Address - Huawei ECC500 User Manual

ECC500
User Manual
Toggles 1 to 8 of DIP switch S2 specify the device address in binary mode. ON indicates 0,
and OFF indicates 1.
Table 4-4 Mapping between device addresses and Modbus card DIP switch settings
Device Toggle
Address Switch 1
1 OFF
2 ON
3 OFF
4 ON
----End

4.4.4 Setting the UPS2000-G-B Device Address

Context
UPS2000-G-B V200R001 is used and equipped with an LCD screen, as shown in
4-26.
Figure 4-26 LCD screen display
Procedure
Step 1 Operate the DIP switch S1 on the optional Modbus card to set the UPS2000-G-B device
address.
Toggles 1 to 8 of DIP switch S1 specify the device address in binary mode. ON indicates 1,
and OFF indicates 0.
Issue 05 (2020-03-16)
Table 4-4
Toggle Toggle
Switch 2 Switch 3
ON ON
OFF ON
OFF ON
ON OFF
Table 4-5
Copyright © Huawei Technologies Co., Ltd.
shows an example of the switch settings.
Toggle Toggle
Switch 4 Switch 5
ON ON
ON ON
ON ON
ON ON
shows an example of the switch settings.
4 Installation and Commissioning
Toggle Toggle
Switch 6 Switch 7
ON ON
ON ON
ON ON
ON ON
Toggle
Switch 8
ON
ON
ON
ON
Figure
46