Adding A T/H Sensor - Huawei ECC500 User Manual

ECC500
User Manual
Device
If the SNMP network management system is deployed or the WebUI needs to be used in the
long term, deploy a firewall in front of the ECC500 collector.
You can log in to the ECC500 WebUI using Windows 7, Windows XP, Internet Explorer 8.0
or later, Firefox, or Chrome. It is recommended that you log in to the ECC500 WebUI using
Internet Explorer 8.0, FireFox32.0, and Chrome37.0.2062.103 m in Windows 7, and using
FireFox32.0 in Windows XP.
Set the TLS1.1 and TLS1.2 protocols for the browser. Use Internet Explorer 8 as an example.
Open the Internet Explorer, choose Tools > Internet Options, click the Advanced tab, and
select Use TLS1.1 and Use TLS1.2.

5.2.2 Adding a T/H Sensor

Prerequisites



Context
After connecting a T/H sensor to the ECC500, add the T/H sensor on the ECC500 WebUI.
Procedure
Step 1 On a PC which is in the same IP address segment as the ECC500, enter
https://XX.XX.XX.XX in the address box, and press Enter.
Step 2 (Optional) Install a network security certificate if a certificate problem message is displayed.
For details, see
Issue 05 (2020-03-16)
Parameter
A T/H sensor is connected to the ECC500. The ECC500 has been powered on.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
XX.XX.XX.XX indicates the ECC500 IP address.
7.3 How Can I Install a Network Security
Copyright © Huawei Technologies Co., Ltd.
Value
Certificate?.
5 UI Description
Remarks
Remember the new password
because it is necessary for
ECC500 commissioning and
maintenance.
56