Adding A Pdu8000 - Huawei ECC500 User Manual

ECC500
User Manual

5.2.7 Adding a PDU8000

Prerequisites



Context
After a PDU8000 is connected to the ECC500, add the PDU8000 on the ECC500 WebUI.
Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Home > Equipment Manage.
Step 3 Select PDU8000 from the Equipment Type drop-down list box and set device parameters, as
shown in
Figure 5-22 Adding a PDU8000
Table 5-9 PDU8000 parameters
Parameter
Communication
Board Slot
Issue 05 (2020-03-16)
A PDU8000 is connected to the ECC500. The PDU8000 and ECC500 have been
powered on.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
Figure 5-22. Table 5-9
Setting
Select 3 from the drop-down list box.
NOTE
Copyright © Huawei Technologies Co., Ltd.
describes the setting methods.
The setting example indicates that the PDU8000 is connected to the COM5
port of the RS485 card in slot 3 of the ECC500. If the PDU8000 is
connected to another port, set the slot number for the connected port.
5 UI Description
75