Optional) Setting The Security Certificates For The Ecc500 Collector And The Network Management System - Huawei ECC500 User Manual

ECC500
User Manual
Figure 5-34 Setting SNMPv3 parameters_05
----End
5.2.13 (Optional) Setting the Security Certificates for the ECC500
Collector and the Network Management System
Prerequisites



Context


Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose System Settings > Pass-through Settings.
Issue 05 (2020-03-16)
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
You have applied for a security certificate and its key, and copied them to a PC.
If the ECC500 collector needs to communicate with an upstream network management
system, install the security authentication certificate by following instructions in this
section.
You need to apply to an organization authorized by the customer for a security certificate
and its key for the ECC500 collector to communicate with the network management
system. This section describes how to import the certificate and key.
Copyright © Huawei Technologies Co., Ltd.
5 UI Description
85