Setting The Netcol8000-A Device Address; Setting The Pdu8000 Device Address - Huawei ECC500 User Manual

ECC500
User Manual

4.4.8 Setting the NetCol8000-A Device Address

Prerequisites


Procedure
Step 1 Tap Settings on the NetCol8000-A home screen.
Step 2 Enter the administrator user name and password and tap
Step 3 Tap Com Settings.
Step 4 Set Com address and Baud Rate.
Table 4-8 Parameter description
Parameter
Com address
Baud Rate
The DataBit, StopBit, and Parity for the NetCol8000-A cannot be set on the WebUI. Their
default values are 8, 1, and None respectively.
----End

4.4.9 Setting the PDU8000 Device Address

Prerequisites


Procedure
Step 1 Tap Settings on the PDU8000 home screen.
Step 2 Enter the PDU8000 password and tap
Issue 05 (2020-03-16)
You have obtained the device address assigned to the NetCol8000-A.
The NetCol8000-A has been powered on.
The preset user name and password for the NetCol8000-A are respectively Admin and 000001. To
ensure access security, change the password upon first use.
You have obtained the device address assigned to the PDU8000.
The PDU8000 has been powered on.
Copyright © Huawei Technologies Co., Ltd.
Setting
Indicates the device address planned for the NetCol8000-A.
The addresses of devices connected to the same collector port
must be unique. When creating a NetCol8000-A on the
ECC500 WebUI, enter the value in Device address.
Retain the default value 9600.
4 Installation and Commissioning
on the screen.
on the screen.
49