Adding The Ea800 Ups - Huawei ECC500 User Manual

ECC500
User Manual

5.2.4.3 Adding the EA800 UPS

Prerequisites



Context
After the EA800 UPS is connected to the ECC500, add the EA800 UPS on the ECC500
WebUI.
Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Home > Equipment Manage.
Step 3 Select EA800UPS from the Equipment Type drop-down list box and set device parameters,
as shown in
Figure 5-18 Adding the EA800 UPS
Table 5-5 EA800 UPS parameters
Parameter
Communication
Board Slot
Communication
Issue 05 (2020-03-16)
The EA800 UPS is connected to the ECC500. The EA800 UPS and ECC500 have been
powered on.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
Figure 5-18. Table 5-5
Setting
Select 3 from the drop-down list box.
NOTE
Select 2 from the drop-down list box.
Copyright © Huawei Technologies Co., Ltd.
describes the setting methods.
The setting example indicates that the EA800 UPS is connected to the
COM2 port of the RS485 card in slot 3 of the ECC500. If the EA800 UPS
is connected to another port, set the slot number for the connected port.
5 UI Description
69